⟁ Michigan Well Data field records · 2026 survey

Michigan Well Data › Sanilac County › Peck (48466)

Peck, MI (48466): well depth, water level & drilling cost

✓ 236 Wellogic records · Sanilac County

120 ftmedian well depth
98 ft–150 fttypical depth range
11 ftmedian static water level
20 gpmmedian yield (228 tests)

How deep are wells in Peck (48466), Michigan?

The median drilled well depth in Peck (48466) is 120 ft, based on 236 wells with recorded depths in the state Wellogic database. Half fall between 98 ft and 150 ft; 90% are shallower than 180 ft.

How much does it cost to drill a well in Peck (48466)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Peck (48466)?

The median static water level is 11 ft below ground surface (middle half of wells: 8 ft–20 ft), from 228 measurements.

Pull every recorded well near a Peck (48466) address — $19

Drilled depth distribution

0–50 ft 17 50–100 ft 43 100–150 ft 113 150–200 ft 52 200–300 ft 11 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Peck (48466)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Sanilac County well records.

Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.