⟁ Michigan Well Data field records · 2026 survey

Michigan Well Data › Missaukee County

Missaukee County, Michigan: well depth, water level & drilling cost

✓ 6,332 Wellogic records · verified 2026-09-28

80 ftmedian well depth
58 ft–136 fttypical depth range
28 ftmedian static water level
20 gpmmedian yield (5,241 tests)

Pull every recorded well near a Missaukee County address — $49

How deep are wells in Missaukee County, Michigan?

The median drilled well depth in Missaukee County is 80 ft, based on 6,313 wells with recorded depths in the state Wellogic database. Half of all wells fall between 58 ft and 136 ft; 90% are shallower than 192 ft. Wells drilled since 2016 have a median depth of 96 ft.

How much does it cost to drill a well in Missaukee County?

Applying published per-foot rates to the local median depth of 96 ft: drilling and casing alone typically runs $2,400–$6,240; a complete system including pump, pressure tank, and hookup typically runs $5,760–$9,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Missaukee County?

The median static water level is 28 ft below ground surface (middle half of wells: 18 ft–62 ft), from 6,106 measurements.

How much water do wells in Missaukee County produce?

The median tested yield is 20 gpm (middle half: 15 gpm–30 gpm), from 5,241 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 961 50–100 ft 2,777 100–150 ft 1,332 150–200 ft 665 200–300 ft 504 300–400 ft 51 400–600 ft 23 600+ ft 0

Who drills wells in Missaukee County?

Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.

DrillerWells since 2016
Pearson Drilling Co462
Lic. #57-2211375
Normans Well Drilling170
Shepler Well Drilling142
Thomas Flint & Son Inc Tra82
Jordan Well Drilling20
Brad Malley Well Drilling8
Frank Piltz Well Drilling6

See every driller with wells on record in Missaukee County, ranked →

Get quotes from local drillers

Looking at a specific property in Missaukee County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Missaukee County

Free. Goes to licensed drillers working Missaukee County.

Well records by ZIP code in Missaukee County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.