Michigan Well Data › Mason County
Mason County, Michigan: well depth, water level & drilling cost
✓ 8,393 Wellogic records · verified 2026-06-29
How deep are wells in Mason County, Michigan?
The median drilled well depth in Mason County is 70 ft, based on 8,374 wells with recorded depths in the state Wellogic database. Half of all wells fall between 51 ft and 101 ft; 90% are shallower than 150 ft. Wells drilled since 2016 have a median depth of 75 ft.
How much does it cost to drill a well in Mason County?
Applying published per-foot rates to the local median depth of 75 ft: drilling and casing alone typically runs $1,875–$4,875; a complete system including pump, pressure tank, and hookup typically runs $4,500–$7,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Mason County?
The median static water level is 24 ft below ground surface (middle half of wells: 14 ft–41 ft), from 8,189 measurements.
How much water do wells in Mason County produce?
The median tested yield is 20 gpm (middle half: 12 gpm–30 gpm), from 7,565 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Mason County address — $19
Drilled depth distribution
Who drills wells in Mason County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #53-2430 | 430 |
| Lic. #43-2140 | 280 |
| Lic. #53-1960 | 217 |
| Lic. #64-1587 | 164 |
| Lic. #41-1987 | 75 |
| Lic. #41-2650 | 74 |
| Lic. #70-2639 | 43 |
| Lic. #70-2055 | 37 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Mason County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Ludington (49431) — 3,329 wells, median 72 ft
- Scottville (49454) — 1,197 wells, median 71 ft
- Freesoil (49411) — 846 wells, median 70 ft
- Branch (49402) — 812 wells, median 70 ft
- Fountain (49410) — 811 wells, median 63 ft
- Custer (49405) — 755 wells, median 80 ft
- 49458 — 51 wells, median 108 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.