Michigan Well Data field records · 2026 survey

Michigan Well Data › Marquette County

Marquette County, Michigan: well depth, water level & drilling cost

✓ 8,883 Wellogic records · verified 2026-06-29

78 ftmedian well depth
50 ft–128 fttypical depth range
20 ftmedian static water level
10 gpmmedian yield (8,237 tests)

How deep are wells in Marquette County, Michigan?

The median drilled well depth in Marquette County is 78 ft, based on 8,865 wells with recorded depths in the state Wellogic database. Half of all wells fall between 50 ft and 128 ft; 90% are shallower than 205 ft. Wells drilled since 2016 have a median depth of 78 ft.

How much does it cost to drill a well in Marquette County?

Applying published per-foot rates to the local median depth of 78 ft: drilling and casing alone typically runs $1,950–$5,070; a complete system including pump, pressure tank, and hookup typically runs $4,680–$7,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Marquette County?

The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–35 ft), from 8,688 measurements.

How much water do wells in Marquette County produce?

The median tested yield is 10 gpm (middle half: 6 gpm–15 gpm), from 8,237 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Marquette County address — $19

Drilled depth distribution

0–50 ft 2,168 50–100 ft 3,418 100–150 ft 1,493 150–200 ft 708 200–300 ft 670 300–400 ft 317 400–600 ft 83 600+ ft 8

Who drills wells in Marquette County?

Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.

DrillerWells since 2016
Lic. #52-1974292
Lic. #22-2431218
Lic. #07-2649145
Lic. #07-1779119
Lic. #22-171623
Lic. #52-178021
Lic. #02-169018
Lic. #77-21966

Get quotes from local drillers

Looking at a specific property in Marquette County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Well records by ZIP code in Marquette County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.