Michigan Well Data › Macomb County
Macomb County, Michigan: well depth, water level & drilling cost
✓ 13,611 Wellogic records · verified 2026-06-29
How deep are wells in Macomb County, Michigan?
The median drilled well depth in Macomb County is 75 ft, based on 13,562 wells with recorded depths in the state Wellogic database. Half of all wells fall between 46 ft and 114 ft; 90% are shallower than 160 ft. Wells drilled since 2016 have a median depth of 75 ft.
How much does it cost to drill a well in Macomb County?
Applying published per-foot rates to the local median depth of 75 ft: drilling and casing alone typically runs $1,875–$4,875; a complete system including pump, pressure tank, and hookup typically runs $4,500–$7,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Macomb County?
The median static water level is 15 ft below ground surface (middle half of wells: 8 ft–35 ft), from 13,046 measurements.
How much water do wells in Macomb County produce?
The median tested yield is 15 gpm (middle half: 10 gpm–30 gpm), from 12,653 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Macomb County address — $19
Drilled depth distribution
Who drills wells in Macomb County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #50-2268 | 661 |
| Lic. #50-2337 | 402 |
| Lic. #50-1719 | 89 |
| Lic. #44-2007 | 69 |
| Lic. #63-2617 | 49 |
| Lic. #74-2736 | 34 |
| Lic. #50-2535 | 30 |
| Lic. #78-1607 | 20 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Macomb County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Bruce Twp (48065) — 2,815 wells, median 82 ft
- 48096 — 1,457 wells, median 57 ft
- Armada (48005) — 1,429 wells, median 66 ft
- Washington (48094) — 1,363 wells, median 101 ft
- Richmond (48062) — 1,241 wells, median 93 ft
- Washington (48095) — 1,056 wells, median 120 ft
- Lenox (48048) — 647 wells, median 42 ft
- Macomb (48042) — 646 wells, median 54 ft
- Lenox (48050) — 609 wells, median 55 ft
- Shelby Township (48316) — 561 wells, median 83 ft
- Shelby Township (48317) — 324 wells, median 34 ft
- Clinton Township (48035) — 267 wells, median 84 ft
- New Baltimore (48051) — 241 wells, median 41 ft
- Shelby Township (48315) — 204 wells, median 55 ft
- Chesterfield Township (48047) — 71 wells, median 70 ft
- Clinton Township (48036) — 52 wells, median 64 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.