Michigan Well Data › Kalamazoo County
Kalamazoo County, Michigan: well depth, water level & drilling cost
✓ 25,765 Wellogic records · verified 2026-09-28
Pull every recorded well near a Kalamazoo County address — $49
How deep are wells in Kalamazoo County, Michigan?
The median drilled well depth in Kalamazoo County is 85 ft, based on 25,678 wells with recorded depths in the state Wellogic database. Half of all wells fall between 59 ft and 115 ft; 90% are shallower than 153 ft. Wells drilled since 2016 have a median depth of 87 ft.
How much does it cost to drill a well in Kalamazoo County?
Applying published per-foot rates to the local median depth of 87 ft: drilling and casing alone typically runs $2,175–$5,655; a complete system including pump, pressure tank, and hookup typically runs $5,220–$8,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Kalamazoo County?
The median static water level is 30 ft below ground surface (middle half of wells: 16 ft–53 ft), from 25,205 measurements.
How much water do wells in Kalamazoo County produce?
The median tested yield is 40 gpm (middle half: 30 gpm–50 gpm), from 23,265 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Kalamazoo County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Kraai Well Drilling | 753 |
| Katz Well Drilling Inc | 264 |
| Zantjer Well Pump and Timo | 202 |
| Lic. #75-1795 | 193 |
| Huff Well Drilling | 184 |
| Lic. #08-1771 | 167 |
| Earl Sanders & Son Inc San | 152 |
| Smith Well & Pump Co Micha | 141 |
See every driller with wells on record in Kalamazoo County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Kalamazoo County.
Well records by ZIP code in Kalamazoo County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Kalamazoo (49009) — 6,011 wells, median 103 ft
- Vicksburg (49097) — 2,647 wells, median 58 ft
- Richland (49083) — 2,329 wells, median 85 ft
- Schoolcraft (49087) — 2,004 wells, median 85 ft
- Kalamazoo (49004) — 1,691 wells, median 94 ft
- Galesburg (49053) — 1,575 wells, median 101 ft
- Scotts (49088) — 1,512 wells, median 68 ft
- Kalamazoo (49048) — 1,311 wells, median 77 ft
- Augusta (49012) — 1,214 wells, median 92 ft
- Portage (49002) — 1,120 wells, median 59 ft
- Climax (49034) — 726 wells, median 85 ft
- Portage (49024) — 715 wells, median 70 ft
- Fulton (49052) — 421 wells, median 76 ft
- Kalamazoo (49001) — 355 wells, median 86 ft
- 49007 — 251 wells, median 121 ft
- Portage (49081) — 133 wells, median 86 ft
- Oshtemo (49077) — 118 wells, median 95 ft
- Comstock (49041) — 103 wells, median 81 ft
- Kalamazoo (49006) — 84 wells, median 113 ft
- 48080 — 67 wells, median 68 ft
- Kalamazoo (49008) — 53 wells, median 90 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.