Michigan Well Data › Ingham County
Ingham County, Michigan: well depth, water level & drilling cost
✓ 14,898 Wellogic records · verified 2026-09-28
Pull every recorded well near a Ingham County address — $49
How deep are wells in Ingham County, Michigan?
The median drilled well depth in Ingham County is 155 ft, based on 14,821 wells with recorded depths in the state Wellogic database. Half of all wells fall between 120 ft and 230 ft; 90% are shallower than 290 ft. Wells drilled since 2016 have a median depth of 160 ft.
How much does it cost to drill a well in Ingham County?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Ingham County?
The median static water level is 24 ft below ground surface (middle half of wells: 15 ft–35 ft), from 14,510 measurements.
How much water do wells in Ingham County produce?
The median tested yield is 30 gpm (middle half: 20 gpm–50 gpm), from 13,372 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Ingham County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| J and M Well Drilling | 207 |
| Dyer Well Drilling & | 203 |
| Maurer and Parks Well Jack | 174 |
| Lic. #19-1868 | 157 |
| Sebastian & Sons | 56 |
| Scharnweber Well | 39 |
| Doody Well Drilling | 33 |
| Kleinschmidt Well Drlg | 31 |
See every driller with wells on record in Ingham County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Ingham County.
Well records by ZIP code in Ingham County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Mason (48854) — 3,330 wells, median 140 ft
- Williamston (48895) — 2,582 wells, median 245 ft
- Stockbridge (49285) — 1,654 wells, median 140 ft
- Leslie (49251) — 1,399 wells, median 136 ft
- Holt (48842) — 979 wells, median 120 ft
- Haslett (48840) — 975 wells, median 220 ft
- Okemos (48864) — 969 wells, median 230 ft
- Webberville (48892) — 964 wells, median 130 ft
- Dansville (48819) — 938 wells, median 140 ft
- Onondaga (49264) — 821 wells, median 120 ft
- Lansing (48911) — 278 wells, median 125 ft
- Lansing (48910) — 119 wells, median 140 ft
- 48824 — 56 wells, median 254 ft
- Lansing (48912) — 56 wells, median 305 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.