Michigan Well Data › Huron County
Huron County, Michigan: well depth, water level & drilling cost
✓ 6,979 Wellogic records · verified 2026-09-28
Pull every recorded well near a Huron County address — $49
How deep are wells in Huron County, Michigan?
The median drilled well depth in Huron County is 130 ft, based on 6,949 wells with recorded depths in the state Wellogic database. Half of all wells fall between 95 ft and 195 ft; 90% are shallower than 235 ft. Wells drilled since 2016 have a median depth of 130 ft.
How much does it cost to drill a well in Huron County?
Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Huron County?
The median static water level is 18 ft below ground surface (middle half of wells: 12 ft–26 ft), from 6,798 measurements.
How much water do wells in Huron County produce?
The median tested yield is 20 gpm (middle half: 15 gpm–30 gpm), from 6,534 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Huron County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Franzel Well Drilling | 260 |
| Thumb Well Drilling Inc To | 156 |
| Kitchen Well Drilling | 79 |
| Gale Prime Water Well Gale | 28 |
| Lic. #79-2078 | 26 |
| Lyons Well Drilling | 18 |
| Traver Well Drilling | 11 |
| J Cambridge, LLC | 10 |
See every driller with wells on record in Huron County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Huron County.
Well records by ZIP code in Huron County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Bad Axe (48413) — 1,000 wells, median 140 ft
- Caseville (48725) — 939 wells, median 135 ft
- Pigeon (48755) — 923 wells, median 210 ft
- Port Austin (48467) — 736 wells, median 100 ft
- Harbor Beach (48441) — 530 wells, median 64 ft
- Ubly (48475) — 480 wells, median 120 ft
- Caseville (48275) — 381 wells, median 110 ft
- Sebewaing (48759) — 367 wells, median 184 ft
- Bay Port (48720) — 350 wells, median 240 ft
- Kinde (48445) — 335 wells, median 116 ft
- Elkton (48731) — 249 wells, median 170 ft
- Owendale (48754) — 247 wells, median 160 ft
- Ruth (48470) — 236 wells, median 50 ft
- Port Hope (48468) — 213 wells, median 55 ft
- Filion (48432) — 170 wells, median 100 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.