Michigan Well Data › Gladwin County
Gladwin County, Michigan: well depth, water level & drilling cost
✓ 14,610 Wellogic records · verified 2026-06-29
How deep are wells in Gladwin County, Michigan?
The median drilled well depth in Gladwin County is 89 ft, based on 14,575 wells with recorded depths in the state Wellogic database. Half of all wells fall between 60 ft and 155 ft; 90% are shallower than 260 ft. Wells drilled since 2016 have a median depth of 96 ft.
How much does it cost to drill a well in Gladwin County?
Applying published per-foot rates to the local median depth of 96 ft: drilling and casing alone typically runs $2,400–$6,240; a complete system including pump, pressure tank, and hookup typically runs $5,760–$9,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Gladwin County?
The median static water level is 12 ft below ground surface (middle half of wells: 6 ft–21 ft), from 13,208 measurements.
How much water do wells in Gladwin County produce?
The median tested yield is 20 gpm (middle half: 10 gpm–30 gpm), from 12,533 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Gladwin County address — $19
Drilled depth distribution
Who drills wells in Gladwin County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #26-2621 | 659 |
| Lic. #26-2248 | 491 |
| Lic. #26-2026 | 343 |
| Lic. #37-2084 | 196 |
| Lic. #26-2182 | 182 |
| Lic. #65-1906 | 104 |
| Lic. #26-2240 | 94 |
| Lic. #06-2467 | 84 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Gladwin County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Gladwin (48624) — 8,016 wells, median 80 ft
- Beaverton (48612) — 4,519 wells, median 97 ft
- Rhodes (48652) — 571 wells, median 285 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.