Michigan Well Data › Eaton County
Eaton County, Michigan: well depth, water level & drilling cost
✓ 15,662 Wellogic records · verified 2026-09-28
Pull every recorded well near a Eaton County address — $49
How deep are wells in Eaton County, Michigan?
The median drilled well depth in Eaton County is 140 ft, based on 15,549 wells with recorded depths in the state Wellogic database. Half of all wells fall between 100 ft and 180 ft; 90% are shallower than 250 ft. Wells drilled since 2016 have a median depth of 123 ft.
How much does it cost to drill a well in Eaton County?
Applying published per-foot rates to the local median depth of 123 ft: drilling and casing alone typically runs $3,075–$7,995; a complete system including pump, pressure tank, and hookup typically runs $7,380–$12,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Eaton County?
The median static water level is 25 ft below ground surface (middle half of wells: 16 ft–37 ft), from 15,338 measurements.
How much water do wells in Eaton County produce?
The median tested yield is 30 gpm (middle half: 15 gpm–50 gpm), from 14,908 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Eaton County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| LJT Well Drilling Inc | 149 |
| Sebastian & Sons | 133 |
| Maurer and Parks Well Jack | 130 |
| Dyer Well Drilling & | 115 |
| Lic. #23-2081 | 77 |
| Walkington Well Drilling | 61 |
| Lic. #19-1868 | 58 |
| Katz Well Drilling Inc | 47 |
See every driller with wells on record in Eaton County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Eaton County.
Well records by ZIP code in Eaton County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Charlotte (48813) — 3,626 wells, median 120 ft
- Eaton Rapids (48827) — 3,067 wells, median 125 ft
- Grand Ledge (48837) — 2,405 wells, median 155 ft
- Bellevue (49021) — 1,878 wells, median 105 ft
- Dimondale (48821) — 1,866 wells, median 141 ft
- Olivet (49076) — 1,137 wells, median 117 ft
- Vermontville (49096) — 1,025 wells, median 102 ft
- Lansing (48917) — 806 wells, median 180 ft
- Mulliken (48861) — 723 wells, median 160 ft
- Sunfield (48890) — 618 wells, median 108 ft
- Potterville (48876) — 610 wells, median 140 ft
- Lansing (48908) — 125 wells, median 120 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.