Michigan Well Data › Clinton County

Clinton County, Michigan: well depth, water level & drilling cost

Name: Clinton County, Michigan water well statistics
Creator: Michigan Well Data
License: https://creativecommons.org/licenses/by/4.0/

✓ 14,753 Wellogic records · verified 2026-08-13

216 ftmedian well depth

180 ft–245 fttypical depth range

32 ftmedian static water level

50 gpmmedian yield (12,999 tests)

How deep are wells in Clinton County, Michigan?

The median drilled well depth in Clinton County is 216 ft, based on 14,723 wells with recorded depths in the state Wellogic database. Half of all wells fall between 180 ft and 245 ft; 90% are shallower than 280 ft. Wells drilled since 2016 have a median depth of 220 ft.

How much does it cost to drill a well in Clinton County?

Applying published per-foot rates to the local median depth of 220 ft: drilling and casing alone typically runs $5,500–$14,300; a complete system including pump, pressure tank, and hookup typically runs $13,200–$22,000. Actual quotes depend on site access, geology, and casing requirements.

Get quotes from drillers active in Clinton County

Free for property owners. We route your request only to licensed drillers who actually file well logs in Clinton County — never sold elsewhere.

What is the static water level in Clinton County?

The median static water level is 32 ft below ground surface (middle half of wells: 20 ft–48 ft), from 14,268 measurements.

How much water do wells in Clinton County produce?

The median tested yield is 50 gpm (middle half: 25 gpm–75 gpm), from 12,999 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Clinton County address — $29

Drilled depth distribution

0–50 ft 415 50–100 ft 849 100–150 ft 1,148 150–200 ft 2,541 200–300 ft 8,670 300–400 ft 917 400–600 ft 182 600+ ft 1

Who drills wells in Clinton County?

Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.

Driller	Wells since 2016
Maurer and Parks Well Jack	217
Jandernoa Water	204
Scharnweber Well	189
Dyer Well Drilling &	119
Doody Well Drilling	104
Lic. #19-1868	103
J and M Well Drilling	53
Johnson Well Drilling	35

See every driller with wells on record in Clinton County, ranked →

Get quotes from local drillers

Looking at a specific property in Clinton County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $29

Well records by ZIP code in Clinton County

Median depth, water level, and yield for each ZIP code with recorded wells.

Dewitt (48820) — 2,786 wells, median 215 ft
Saint Johns (48879) — 2,777 wells, median 215 ft
Lansing (48906) — 1,671 wells, median 220 ft
Bath (48808) — 1,460 wells, median 240 ft
Ovid (48866) — 994 wells, median 170 ft
Elsie (48831) — 777 wells, median 180 ft
Eagle (48822) — 658 wells, median 170 ft
East Lansing (48823) — 618 wells, median 236 ft
Fowler (48835) — 429 wells, median 170 ft
Westphalia (48894) — 304 wells, median 275 ft

Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.