Michigan Well Data › Chippewa County
Chippewa County, Michigan: well depth, water level & drilling cost
✓ 9,723 Wellogic records · verified 2026-09-28
Pull every recorded well near a Chippewa County address — $49
How deep are wells in Chippewa County, Michigan?
The median drilled well depth in Chippewa County is 105 ft, based on 9,671 wells with recorded depths in the state Wellogic database. Half of all wells fall between 72 ft and 154 ft; 90% are shallower than 217 ft. Wells drilled since 2016 have a median depth of 118 ft.
How much does it cost to drill a well in Chippewa County?
Applying published per-foot rates to the local median depth of 118 ft: drilling and casing alone typically runs $2,950–$7,670; a complete system including pump, pressure tank, and hookup typically runs $7,080–$11,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Chippewa County?
The median static water level is 14 ft below ground surface (middle half of wells: 5 ft–30 ft), from 9,075 measurements.
How much water do wells in Chippewa County produce?
The median tested yield is 10 gpm (middle half: 8 gpm–10 gpm), from 9,214 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Chippewa County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Louies Well Drilling LTD | 1,095 |
| Kopecky Well Drilling | 4 |
| Chad Malley Well | 2 |
| Dyer Well Drilling & | 2 |
| West Shore Well | 1 |
| Lic. #19-1913 | 1 |
See every driller with wells on record in Chippewa County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Chippewa County.
Well records by ZIP code in Chippewa County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Sault Ste Marie (49783) — 2,360 wells, median 112 ft
- Brimley (49715) — 1,113 wells, median 122 ft
- Drummond Island (49726) — 1,101 wells, median 100 ft
- Pickford (49774) — 855 wells, median 106 ft
- Rudyard (49780) — 644 wells, median 160 ft
- Paradise (49768) — 631 wells, median 90 ft
- Dafter (49724) — 558 wells, median 97 ft
- Detour (49725) — 502 wells, median 118 ft
- Goetzville (49736) — 419 wells, median 73 ft
- Eckerman (49728) — 408 wells, median 82 ft
- Barbeau (49710) — 380 wells, median 83 ft
- Kinross (49752) — 328 wells, median 96 ft
- Trout Lake (49793) — 320 wells, median 160 ft
- Hulbert (49748) — 183 wells, median 88 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.