Michigan Well Data › Branch County
Branch County, Michigan: well depth, water level & drilling cost
✓ 10,063 Wellogic records · verified 2026-09-28
Pull every recorded well near a Branch County address — $49
How deep are wells in Branch County, Michigan?
The median drilled well depth in Branch County is 59 ft, based on 10,040 wells with recorded depths in the state Wellogic database. Half of all wells fall between 43 ft and 82 ft; 90% are shallower than 105 ft. Wells drilled since 2016 have a median depth of 59 ft.
How much does it cost to drill a well in Branch County?
Applying published per-foot rates to the local median depth of 59 ft: drilling and casing alone typically runs $1,475–$3,835; a complete system including pump, pressure tank, and hookup typically runs $3,540–$5,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Branch County?
The median static water level is 14 ft below ground surface (middle half of wells: 7 ft–22 ft), from 9,676 measurements.
How much water do wells in Branch County produce?
The median tested yield is 25 gpm (middle half: 15 gpm–40 gpm), from 9,648 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Branch County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Katz Well Drilling Inc | 716 |
| Sebastian & Sons | 210 |
| Lic. #12-2261 | 144 |
| Huff Well Drilling | 107 |
| C & B Pump Service | 96 |
| Stewarts Water Well | 77 |
| Rice Well Service | 77 |
| Kirk Yearling | 43 |
See every driller with wells on record in Branch County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Branch County.
Well records by ZIP code in Branch County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Coldwater (49036) — 4,457 wells, median 53 ft
- Quincy (49082) — 1,782 wells, median 58 ft
- Bronson (49028) — 1,533 wells, median 67 ft
- Union City (49094) — 909 wells, median 62 ft
- Montgomery (49255) — 745 wells, median 78 ft
- Sherwood (49089) — 659 wells, median 58 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.