Michigan Well Data › Arenac County
Arenac County, Michigan: well depth, water level & drilling cost
✓ 5,080 Wellogic records · verified 2026-09-28
Pull every recorded well near a Arenac County address — $49
How deep are wells in Arenac County, Michigan?
The median drilled well depth in Arenac County is 80 ft, based on 5,049 wells with recorded depths in the state Wellogic database. Half of all wells fall between 57 ft and 120 ft; 90% are shallower than 223 ft. Wells drilled since 2016 have a median depth of 82 ft.
How much does it cost to drill a well in Arenac County?
Applying published per-foot rates to the local median depth of 82 ft: drilling and casing alone typically runs $2,050–$5,330; a complete system including pump, pressure tank, and hookup typically runs $4,920–$8,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Arenac County?
The median static water level is 15 ft below ground surface (middle half of wells: 8 ft–33 ft), from 4,839 measurements.
How much water do wells in Arenac County produce?
The median tested yield is 15 gpm (middle half: 12 gpm–25 gpm), from 4,720 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Arenac County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Meihls Well Drilling | 416 |
| R Webb & Son Well | 50 |
| Lic. #65-2596 | 29 |
| Graves Well Drilling | 25 |
| B and B Well Drilling | 23 |
| Chad Malley Well | 19 |
| Lic. #65-2178 | 18 |
| Roy Simmons & Son | 17 |
See every driller with wells on record in Arenac County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Arenac County.
Well records by ZIP code in Arenac County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Alger (48610) — 2,094 wells, median 91 ft
- Standish (48658) — 1,290 wells, median 79 ft
- Sterling (48659) — 1,217 wells, median 68 ft
- Au Gres (48703) — 639 wells, median 118 ft
- Twining (48766) — 439 wells, median 65 ft
- Omer (48749) — 423 wells, median 80 ft
- Turner (48765) — 198 wells, median 200 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.