Michigan Well Data › Antrim County
Antrim County, Michigan: well depth, water level & drilling cost
✓ 9,704 Wellogic records · verified 2026-09-28
Pull every recorded well near a Antrim County address — $49
How deep are wells in Antrim County, Michigan?
The median drilled well depth in Antrim County is 103 ft, based on 9,661 wells with recorded depths in the state Wellogic database. Half of all wells fall between 67 ft and 152 ft; 90% are shallower than 217 ft. Wells drilled since 2016 have a median depth of 107 ft.
How much does it cost to drill a well in Antrim County?
Applying published per-foot rates to the local median depth of 107 ft: drilling and casing alone typically runs $2,675–$6,955; a complete system including pump, pressure tank, and hookup typically runs $6,420–$10,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Antrim County?
The median static water level is 40 ft below ground surface (middle half of wells: 14 ft–90 ft), from 9,287 measurements.
How much water do wells in Antrim County produce?
The median tested yield is 20 gpm (middle half: 12 gpm–30 gpm), from 9,279 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Antrim County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Orins Well Drilling | 405 |
| Lic. #05-1914 | 204 |
| Berg Well Drilling Inc | 153 |
| Cluff Well Drilling | 153 |
| Lic. #40-2524 | 147 |
| J&B Water Well Drilling Je | 146 |
| A S Rivard and Son | 76 |
| B & Z Well Drilling Co | 50 |
See every driller with wells on record in Antrim County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Antrim County.
Well records by ZIP code in Antrim County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Mancelona (49659) — 2,722 wells, median 116 ft
- Bellaire (49615) — 1,607 wells, median 89 ft
- Kewadin (49648) — 1,443 wells, median 100 ft
- Elmira (49730) — 1,185 wells, median 109 ft
- Central Lake (49622) — 745 wells, median 80 ft
- Ellsworth (49729) — 635 wells, median 90 ft
- Alden (49612) — 556 wells, median 110 ft
- Elk Rapids (49629) — 471 wells, median 93 ft
- Alba (49611) — 164 wells, median 112 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.